Advanced Search
Search Results
128 total results found
LG - Installation
Alpha-1 Placement on Machine Example: LG Stacked Washer Dryer STACK DRYER/WASHER Be cautious before installation ⚠️ No pinch and wire for the main board while installing. Turn off the machine electricity while during installation. Devi...
Speed Queen v1- Installation
Speed Queen Single Washer & Stack washer / Dryer Type off Speed Queen Machine “Types of installation for Speed Queen machines” Cashless Installation- Speed Queen Stack Washer/Dryer STGNCASP116TW01 ☞ Cashless connection for E-payment transact...
IPSO - Installation
IPSO Washer/Dryer Example: Dryer Example: Washer Harness Installation The IPSO machine has input and output connectors. Unplug them and connect them to the harness connector. Use thick wire 1mm or 1.5mm to connect Output (No3) 2. From the ha...
Steps for Installation on Detergent machine
Wi-Fi Setup : A.Ensure Wi-Fi is ready with a strong signal to support the Alpha1 device. B. 2.4GHz is recommended. Device Placement : A. Place the Alpha1 device as shown in Picture 1. b. You may place it elsewhere, but ensure it is safe and secure...
Go World - Installation
(A) From Chinese brands such as Go World, Octopus, and Oasis. Example: Go World Stack Washer/Dryer Washer/Dryer Harness connection 1. These models are equipped with a specific harness connector designed to connect to the machine’s board. 2. Connect the w...
Fargo - Installation
Example: Fargo Wire Harness Fargo Harness connection Washer/Dryer 1. The Fargo machine comes with a specific connector. The coin acceptor cable from the machine also has a connector—remove it, then connect it to the provided wire harness, matching the m...
Blue Whale - Installation
Example: Blue Whale Stack Dryer & Washer (A) Connection Washer/Dryer 1. Blue Whale machine, the connection is direct and simple. You will see three wires running from the board to the coin acceptor (Black, White, and Red).” 2. As shown in the picture...
WIFI Configuration (ALPHA-1)
(A) Step-By-Step WIFI Configuration 1. Login to Node-Laundro application (https://node.thelaundro.com/login) using given username and password. Example: Login Page 2. Search using the outlet name or ID provided, then click on the outlet to view its deta...
Electrolux - Installation
Alpha-3 Device
Alpha-1 version 4.3 is an upgrade which aims to ease the installation process. The diagram below shows an overview of what its wire connection looks like. There’s primarily 2 major update in this version: Device is connected directly to cloud Smaller...
Vending Machine Type A (Vending A)
Vending Machine Type A (VendingA) 1) Vending machines that have up to 2 normally open pulse based coin acceptors, up to 6 item slots and a built-in normally open pulse based bill acceptor. You will require the Vending A wire harness that has 9 wires on i...
Bill Acceptor Type A (Bill Acceptor A)
1) Bill acceptors that use a single normally open pulse based signal. (e.g ICT Bill Acceptor) You will require the BillAcceptor wire harness that has 1 wire on it. Open up the machine and the bill acceptor. Attach 1 G-splice connector to the blu...
Check Fiuu Payment Records
(ENG) 👉Step 1: Log in to the FIUU portal using your existing ID and password. 👉Step 2: Click on "Transactions". 👉Step 3: Click on "Main Accounts". 👉Step 4: Now you can view the transaction date and time. 👉Step 5: Scroll to the right to view the mach...
Coin read not detect
When a customer makes a payment using token, coin, or Cloud Pay, the payment amount is expected to be displayed on the cloud node as a coin read. However, there are cases where the payment cannot be read or detected by the coin reader, resulting in the trans...
Short Running Cycle
When we check the data in the transaction record, we found a Short Running Circle as shown [in the image]. Threshold After configure, observe the threshold menu for each device at the configuration page. The default “Threshold” value is set to ...
The current value is not increasing
Issue Description:When the washer or dryer starts its cycle, the current value does not increase as expected. Consequently, the app display does not change from blue to green. Possible Cause: There may be an issue with the current sensor, communication...
Offline Device
In a normal situation, the device status LED displays blue and green lights. [as shown in the picture] Blue : Device / Machine idle & Ready to use...
Specific Case
1. Alpha-1 - Blue LED turns off and nothing happens for a long time. WiFi password was most likely keyed in wrongly. Wait for 10-15 mins until the blue LED starts blinking again. Reset the device with the power switch and check if the blue and green LED b...