Search Results

Alpha-1 version 4.3 is an upgrade which aims to ease the installation process. The diagram below shows an overview of what its wire connection looks like. There’s primarily 2 major update in this version: Device is connected directly to cloud Smaller...

Vending Machine Type A (VendingA) 1) Vending machines that have up to 2 normally open pulse based coin acceptors, up to 6 item slots and a built-in normally open pulse based bill acceptor. You will require the Vending A wire harness that has 9 wires on i...

1) Bill acceptors that use a single normally open pulse based signal. (e.g ICT Bill Acceptor) You will require the BillAcceptor wire harness that has 1 wire on it. Open up the machine and the bill acceptor. Attach 1 G-splice connector to the blu...

(ENG) 👉Step 1: Log in to the FIUU portal using your existing ID and password. 👉Step 2: Click on "Transactions". 👉Step 3: Click on "Main Accounts". 👉Step 4: Now you can view the transaction date and time. 👉Step 5: Scroll to the right to view the mach...

When a customer makes a payment using token, coin, or Cloud Pay, the payment amount is expected to be displayed on the cloud node as a coin read. However, there are cases where the payment cannot be read or detected by the coin reader, resulting in the trans...

When we check the data in the transaction record, we found a Short Running Circle as shown [in the image].   Threshold After configure, observe the threshold menu for each device at the configuration page. The default “Threshold” value is set to ...

Issue Description:When the washer or dryer starts its cycle, the current value does not increase as expected. Consequently, the app display does not change from blue to green. Possible Cause: There may be an issue with the current sensor, communication...

In a normal situation, the device status LED displays blue and green lights. [as shown in the picture]                                                                                                             Blue    : Device / Machine idle & Ready to use...

1. Alpha-1 - Blue LED turns off and nothing happens for a long time.  WiFi password was most likely keyed in wrongly. Wait for 10-15 mins until the blue LED starts blinking again. Reset the device with the power switch and check if the blue and green LED b...

If this situation occurs, what needs to be done is: Obtain the payment details, such as the receipt, for the E-Payment transaction. Log in to the operator dashboard, then go to the e-payment report & Fill in TransactionI'd     3. Fill in Tra...

This document provides the technical steps required to migrate device partitions and upgrade to the latest production firmware. 1. Initial Firmware Preparation Navigate to the target device within the Node Cloud dashboard. Select "Migration" from the Rele...

In the event of a system downtime or system instability, we sometimes require to temporarily to stop all payments from going through to avoid and false payments. Hence, we have introduced a kill switch feature which can be accessed by all operators that will s...

Steps: Log into your node cloud account Navigate to the device that you intend to update and select "latest" in the release dropdown menu Once you have selected "latest", click on "Check update" and you will see a message saying update is ...

Portal URL: https://printsrv.quickticket.cn/ Username: Kar Yan password: [email protected] You can check your printer status and printer task status in the portal. Printer Status: Printer Task Status: API access key and secret: Device ID The Printer Devic...

Prerequisites Before starting, ensure you have the following: Download Flashing tool and latest firmware here -> Flashing Tool.zip Windows laptop/pc (recommended) microUSB cable Cytron USB-UART Converter UC00C (shown below) Flashing Procedure ...

1) Follow the steps below to connect the device to a Wi-Fi network. Ensure that the Wi-Fi network is available and that you have the correct Wi-Fi ID/Name and password before proceeding. Device support only 2.4gh. Step 1- To connect the device to a new Wi-F...

Login operator -> click paymnent gateway -> click add duitnow Add credentials ONBOARDING KEY Just click (space) After submit please click token config Select option - Duitnow Duitnow Config - Pegepay Duitnow

“First, open the LAUNDRO Operator link page.” - https://v2.thelaundro.com/operator_login Operator Login “Next, open the Revenue Monster link page as well.” - https://merchant.revenuemonster.my/ Revenue Monster Portal tes1 test2  test4 ...

Document will be updated soon!