โก How to Do Remote Activation
Welcome to the Laundro Portal Guide! ๐
Need to start a Washer or Dryer remotely? Follow this guide to activate the correct machine, manage maintenance status, and control machine service.
๐งญ Quick Navigation
- โก Remote Activation
- ๐ ๏ธ Put a Machine Under Maintenance
- ๐ Remove a Machine from Maintenance
- ๐ Enable or Disable Service
- ๐ Troubleshooting
โก Part 1: Remote Activation
Purpose: Remotely activate a selected Washer or Dryer through the Laundro Portal.
๐ Step 1: Log In to Laundro Portal
Open the Laundro Portal and enter your operator username and password.
๐ Portal Login: https://v2.thelaundro.com/operator_login
โ๏ธ Step 2 โ Open Remote Activation
After logging in:
๐ก Tip: Make sure you have the correct account permissions to access this feature.
๐ช Step 3 โ Select an Outlet
On the Remote Activation page:
- Click the Outlet dropdown.
- Select the outlet where the machine is located.
๐ก Quick Tip: Always double-check the outlet before selecting a machine.
๐งบ Step 4 โ Select a Machine Type
Choose the required machine type:
- ๐งบ Washer โ to find a washing machine.
- ๐ฅ Dryer โ to find a drying machine.
๐ Step 5 โ Select the Machine
- Select the correct machine number, such as W1 or D1.
- Enter the required Amount.
- Add a Remark explaining the reason for activation.
- Double-check all details before proceeding.
โ ๏ธ Important: Confirm the machine number before proceeding to avoid activating the wrong machine.
โ Step 6 โ Complete Remote Activation
- Click Pay Now.
- Follow the confirmation instructions displayed in the portal.
- Check the activation result and confirm whether the machine starts successfully.
โ ๏ธ Important: Verify the actual machine status before considering the process complete. If activation fails, record the outlet, machine number and error message, then contact Laundro Support.
Activation Result
If the activation is successful:
Success โ The machine will start.
If the activation fails, the machine will not start.
Possible reasons include:
- The machine/device is offline.
- The device cannot receive the activation request.
- There is a communication or device error.ย
๐ ๏ธ Part 2: Put a Machine Under Maintenance
Use Maintenance Mode when a machine needs to be temporarily marked as unavailable for normal operation.
- Open the Maintenance tab.
- Switch Maintenance Mode ON.
- Enter a remark explaining the reason.
Example: Machine is being repaired.
- Confirm that the machine status shows Under Maintenance.
๐ Part 3: Remove a Machine from Maintenance
After the maintenance work is completed:
- Open the Maintenance tab.
- Switch Maintenance Mode OFF.
- Enter a remark explaining why the machine is being returned to service.
- Confirm the change.
- Check that the machine is no longer marked as Under Maintenance.
๐ Part 4: Enable or Disable Service
Use this function to control the machine's service status.
- โ Enable Service: Turn the machine service on.
- โ Disable Service: Turn the machine service off.
๐ก Note: This feature is available only for machines running Alpha2 firmware. A remark is not required for these service actions.
๐ Quick Reference
Action | What it does | Remark Required? |
|---|---|---|
Start | Remotely starts the machine | Yes |
Maintenance Mode ON | Marks the machine as Under Maintenance | Yes |
Maintenance Mode OFF | Removes the machine from maintenance | Yes |
Enable Service | Enables machine service | No |
Disable Service | Disables machine service | No |
๐ Part 5: Troubleshooting
Issue: The machine does not start after remote activation.
Check the following:
- Is the machine/device online?
- Did you select the correct outlet?
- Did you select the correct machine?
- Can the device receive remote commands?
If the issue persists, contact Laundro Support with the outlet name, machine number and error details.
Issue: The Service option is not working.
Check whether the machine is running Alpha2 firmware.
๐ You're all set! Always verify the machine status after making changes in the Laundro Portal.





