Skip to main content

IPSO - Installation

IPSO Washer/Dryer

Example: Dryer

image44.png

Harness Installation
  1. The IPSO machine has input and output connectors. Unplug them and connect them to the harness connector.

image62.png

AD_4nXeDb5_kSWl1WqctJWXoPmaE7cnvz2O2qCSJAuc0GbgaOen6pRuVKpEFyB2oQZys21p_dmBCcuyRp-auG5-cLB6jU7XGiFQZcR1U0BSODnSRdCL_AG7gOk33ncDydxWvJPH1obAQdrSAMWlTcyr6p0PFZ9hK?key=ZwId3kLhK08sTgnEgZhPQwRequired: 1mm or 1.5mm cable (No3)

2. From the harness connector, connect the output and input to the 4-core wire from the device, following the input and output terminals. Ensure that the input and output negative (–) and positive (+) connections are correct.

3. For this machine, use a 1 mm or 1.5 mm  thick cable for the output to ensure a better pulse signal.