IPSO - Installation

IPSO Washer/Dryer

Example: Dryer

Harness Installation

1. The IPSO machine has input and output connectors. Unplug them and connect them to the harness connector.

Required: 1mm or 1.5mm cable (No3)

2. From the harness connector, connect the output and input to the 4-core wire from the device, following the input and output terminals. Ensure that the input and output negative (–) and positive (+) connections are correct.

3. For this machine, use a 1 mm or 1.5 mm  thick cable for the output to ensure a better pulse signal.