Skip to main content

IPSO - Installation

IPSO Washer/Dryer

Example: Dryer

image44.png

Harness Installation
  1. The IPSO machine has input and output connectors. Unplug them and connect them to the harness connector.

image62.png

2. From the harness connector, connect the output and input to the 4-core wire from the device, following the input and output terminals. Ensure that the input and output negative (–) and positive (+) connections are correct.

3. For this machine, use a 1 mm or 1.5 mm cable for the output to ensure a better pulse signal.

Back to top