Installing additional Access Point (AP)

When an outlet has a large number of devices, adding an additional stand-alone access point (AP) can help reduce the load on the router and improve connectivity. This guide explains the process of adding an additional AP and how how to migrate the WIFI settings from the original router to the new AP. 

 1. Connect to the Existing Wi- Fi Network 

 Connect to your existing Wi- Fi network ( e. g., l aundro ) using a mobile device such as a laptop or smartphone. 

 

 2. Access the Router's Web Interface 

 Open a web browser ( e. g., Chrome) and enter the IP address of the router. Common router IP addresses include: 

 

 

 192.168.0.1 

 

 

 192.168.1.1 

 

 

 192.168.100.1 

 

 

 

 3. Log In to the Router 

 Enter the router's login credentials. These may have been set previously or can often be found on a label at the bottom of the router. This will take you to the router's home page. 

 

 4. Identify the Access Point ( AP) 

 Click on the Wired Clients icon. You should see a device listed— this is the access point ( AP). Take note of its IP address ( e. g., 192.168.1.120 ). 

 

 5. Rename the Router’s SSID 

 Click on the Wireless tab in the left navigation menu. Change the name of the current SSID ( Wi- Fi network name) to something different, then click Save . 

 

 6. Disconnect from the Router 

 Changing the SSID will disconnect you from the Wi- Fi network. If the device does not disconnect automatically, you can manually do so. 

 

 7. Connect to the Access Point 

 Now connect to the AP's default Wi- Fi network. This is usually named after the AP model . 

 

 8. Log In to the Access Point 

 Open a new tab in your browser and enter the IP address you noted earlier. This will bring you to the AP’s login page. Log in using the default credentials provided by the manufacturer ( e. g., Username: admin Password: admin ). 

 

 9. Change Default Credentials 

 You will be prompted to change the default username and password. Choose secure credentials and make sure to remember them. Click Next to proceed. 

 

 10. Configure Wi- Fi Settings on the AP 

 Set the SSID and password to match the original network name and credentials ( e. g., l aundro ). Click Save . 

 

 11. Wait for Settings to Apply 

 The AP will apply the new settings. A loading bar will be displayed during this process. 

 

 12. Confirmation Page 

 Once the settings are saved, a success page will appear prompting you to reconnect to the updated network. 

 

 13. Reconnect to the Original SSID 

 Reconnect to the original SSID ( e. g., l aundro ), check the box that says " I have connected to the new wireless network" , and click Finish . 

 

 14. Verify AP Setup 

 You will now be directed to the AP’s home page. Confirm that the setup has been completed successfully. 

 

 15. Check Connected Devices 

 Navigate to the Client List tab and verify that devices ( such as Alpha devices) are starting to connect to the new AP. 

 

 16. Reopen the Router Settings 

 In your browser, go back to the router's IP address ( e. g., 192.168.1.1 ) and log in again. 

 

 17. Disable the Router’s SSID 

 Go to the Wireless tab in the router settings. Uncheck the Enable SSID checkbox to disable the router's own wireless network. Click Save . 

 

 18. Final Verification 

 Verify that all devices are online via NodeCloud , and confirm that only the original SSID ( now being broadcast by the AP) is active.