# IPSO - Installation

IPSO Washer/Dryer

**Example: Dryer**

[![image44.png](https://docs.antlysis.com/uploads/images/gallery/2025-08/scaled-1680-/if2VVd55xOyH1Cfi-image44.png)](https://docs.antlysis.com/uploads/images/gallery/2025-08/if2VVd55xOyH1Cfi-image44.png)

**Example: Washer**

**[![image26.png](https://docs.antlysis.com/uploads/images/gallery/2025-08/scaled-1680-/3FaJswbgi5RpJYYg-image26.png)](https://docs.antlysis.com/uploads/images/gallery/2025-08/3FaJswbgi5RpJYYg-image26.png)**

##### **Harness Installation**

1. The IPSO machine has input and output connectors. Unplug them and connect them to the harness connector.

[![image62.png](https://docs.antlysis.com/uploads/images/gallery/2025-08/scaled-1680-/pPLkiLgemoNVhYVG-image62.png)](https://docs.antlysis.com/uploads/images/gallery/2025-08/pPLkiLgemoNVhYVG-image62.png)

**![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXeDb5_kSWl1WqctJWXoPmaE7cnvz2O2qCSJAuc0GbgaOen6pRuVKpEFyB2oQZys21p_dmBCcuyRp-auG5-cLB6jU7XGiFQZcR1U0BSODnSRdCL_AG7gOk33ncDydxWvJPH1obAQdrSAMWlTcyr6p0PFZ9hK?key=ZwId3kLhK08sTgnEgZhPQw)Use thick wire 1mm or 1.5mm to connect Output (No3)**

2\. From the harness connector, connect the output and input to the 4-core wire from the device, following the input and output terminals. Ensure that the input and output negative (–) and positive (+) connections are correct.

3\. For this machine, use a 1 mm or 1.5 mm thick cable for the output to ensure a better pulse signal.

[![image72.png](https://docs.antlysis.com/uploads/images/gallery/2025-08/scaled-1680-/o8wiSUJ6MehxcaPw-image72.png)](https://docs.antlysis.com/uploads/images/gallery/2025-08/o8wiSUJ6MehxcaPw-image72.png)